Raja Borewells — pure borewell drilling across all of Hyderabad & Telangana. 4.5" domestic, 6.5" commercial, Robo borewell, DTH deep drilling, rod flushing, pipe flushing, borewell deepening & recharge pits. Call or email anytime.
No pump fitting. No motor repair. We focus exclusively on drilling so every rig, crew, and process is optimised for one job only.
Standard residential borewell for individual houses, villas, and small apartments. Our 4.5-inch DTH rigs with Ingersoll Rand and Atlas Copco compressors cut through Hyderabad's hard granite cleanly, reaching productive aquifer fissures at 200–800 ft. Includes pre-drill hydrogeology survey, rod flushing on completion, and casing pipe to CGWB standards.
For apartments, commercial buildings, industries, hotels, and agricultural properties needing high water yield. The 6.5-inch borehole permits larger pump casings and higher extraction rates. Commonly drilled to 400–1500 ft with a mandatory 24-hour yield test post-drilling.
When a full-sized truck or tractor rig cannot enter — inside existing buildings, under low-clearance roofs, narrow lanes under 8 feet wide, courtyards, basements — our compact Robo rigs deliver the same DTH drilling quality. Widely used in old Hyderabad localities like Nampally, Koti, Charminar, and in gated communities where re-drilling is needed after construction.
For open agricultural land, farmhouses, and layouts with good rig access around Hyderabad's periphery — Shankarpalli, Chevella, Moinabad, Tukkuguda, Ibrahimpatnam, Yacharam, Kothur, Shadnagar. Tractor-mounted rigs are faster to mobilise and economical for medium depths up to 500–600 ft.
When an existing borewell runs dry or yield drops, deepening is almost always more economical than sinking a new bore. We extend existing 4.5" and 6.5" borewells downward into fresh aquifer fissure zones without disturbing the original casing pipe. Rod flushing is done after each deepened section.
Hyderabad's hard granite aquifers are finite — what you extract, you must replenish. We design and build percolation pits and filter trenches alongside new borewells or retrofitted to existing ones, to channel monsoon rainwater back into the aquifer. After 2–3 monsoon cycles, recharge structures measurably improve borewell yield.
Two completely separate borewell operations done at different stages. Most customers — and even some contractors — confuse them. Here's exactly what each one is.
| Parameter | Rod Flushing | Pipe Flushing |
|---|---|---|
| When | During drilling — before casing | After casing pipe is installed |
| What is flushed | Open raw borehole | Inside the installed casing pipe |
| Material removed | Rock cuttings, granite dust, clay, drilling chips | Fine silt, sand, debris inside casing |
| Equipment | Drill rods + compressor air through rods | High-pressure water pump or air through casing |
| Duration | 30 min – 2 hrs depending on depth | 30 min – 1.5 hrs |
| Charging | Per running foot (Rs.50–100/ft) | Lump sum per borewell |
| Can it be skipped? | No — permanently blocks aquifer fractures | Not recommended for 6.5" commercial bores |
| Effect on yield | Determines how cleanly aquifer fractures are opened | Determines free water flow through casing on first pumping |
The most important decision before drilling is choosing the right diameter. Here is the complete cost comparison from rajaborewells.in — the only place in Greater Hyderabad that publishes transparent borewell drilling rates.
Standard diameter for individual houses, villas, and small apartments across Hyderabad & Secunderabad. Yields 1–3 inches/hr. Accepts 4-inch submersible pump. Depth 300–800 ft typical in GHMC areas.
| Depth | Rate | Formation |
| 0–100 ft | Base/ft | Topsoil |
| 100–300 ft | Tier 2–3/ft | Soft–Medium Rock |
| 300–500 ft | Tier 4/ft | Hard Granite |
| 500–800 ft | Tier 5/ft | Deep Fissure |
| 800 ft+ | Negotiated | Ultra Deep |
For large apartments, commercial buildings, industries, hotels, and farms requiring 3–10+ inches/hr yield. Accepts 6-inch submersible pump. Depth 400–1200 ft typical. Costs 20–35% more per foot than 4.5".
| Depth | Rate | vs 4.5" |
| 0–100 ft | Base/ft | +20–25% |
| 100–400 ft | Tier 2–3/ft | +22–28% |
| 400–600 ft | Tier 4/ft | +28–32% |
| 600–1000 ft | Tier 5/ft | +30–35% |
| 1000 ft+ | Negotiated | Special |
For an exact quotation for your locality, call 9533909091 or email rajaaborewells@gmail.com — rajaborewells.in
If a standard rig cannot access your property, Robo borewell drilling is the answer. Here is the complete cost breakdown from rajaborewells.in — the only Greater Hyderabad Robo borewell contractor publishing transparent per-foot rates.
A Robo borewell uses a compact, remotely operated DTH rig that can be dismantled, carried inside through a doorway, reassembled and operated in confined spaces — inside buildings, under low roofs, in lanes under 8 ft wide, in basements, and in courtyards where no truck or tractor rig can enter.
Despite the compact equipment, Robo borewell drilling in Hyderabad delivers the same DTH drilling quality and depth capability as a full-size truck rig — same diameter (4.5" or 6.5"), same granite-penetrating compressed air system, same CGWB-compliant casing pipe installation.
| 0–100 ft | Base Rate |
| 101–300 ft | Tier 2–3 |
| 301–500 ft | Tier 4 |
| 501–700 ft | Tier 5 |
| 700 ft+ | Negotiated |
4.5 inch, 6.5 inch, or Robo borewell — we visit your site, assess access and depth, and give you a written itemised quotation before any drilling begins. Greater Hyderabad only.
🌐 www.rajaborewells.in | 📍 All over Greater Hyderabad & Secunderabad
Hyderabad's hard granite uses tiered depth pricing revised by the Greater Hyderabad Rig Owners Association. Call 9533909091 or email rajaaborewells@gmail.com for a written quotation.
4.5" prices per the Rig Owners Association revised schedule. All charges itemised in writing before work starts. Email rajaaborewells@gmail.com for PDF quotation.
Robo and tractor-mounted rates quoted after site visit. Borewell deepening quoted per-foot based on existing bore diameter. Call 9533909091 for current rates.
Greater Hyderabad spans GHMC, Rangareddy, Medchal-Malkajgiri, and Hyderabad districts — all sitting on ancient Deccan Plateau granite that is 2.5 billion years old. Unlike alluvial plains where tube wells reach water at 50–150 ft in sandy soil, borewell drilling in Greater Hyderabad means fracturing solid granite at 300–900 ft to reach water trapped in rock fissures. This is not a minor technical difference — it means every borewell company operating in Greater Hyderabad must use DTH (Down-the-Hole) pneumatic drilling with high-pressure Ingersoll Rand or Atlas Copco compressors. Standard rotary rigs used elsewhere in India will not penetrate Hyderabad's granite efficiently.
Raja Borewells has drilled over 1,200 borewells exclusively across Greater Hyderabad — from the dense urban zones of KPHB, Ameerpet, and Madhapur to the outer ring road corridors of Dundigal, Ghatkesar, Kokapet, and Shamshabad. Every area has a different depth profile, different rock hardness, and a different aquifer structure. This hyperlocal experience, built entirely within Greater Hyderabad, is what separates us from contractors who work across multiple states and don't know the local geology.
The most important piece of information before drilling in Greater Hyderabad is the expected depth for your specific locality. Here is a real-world depth reference compiled from Raja Borewells' own drilling records across Greater Hyderabad:
Note: Depths above are typical ranges from Raja Borewells' Greater Hyderabad drilling records. Actual depth varies by plot, rock fracture density, and seasonal water table. Call 9533909091 for a site-specific assessment.
Borewell drilling cost in Greater Hyderabad is charged per running foot and increases in tiers as depth increases and rock hardness rises. The rate for 0–100 ft (topsoil and weathered rock) is the base rate. From 100 ft onward, each 100 ft slab carries a higher per-foot rate as the rig enters progressively harder granite. Casing pipe is charged separately per foot — 5" inner + 7" outer for 4.5" borewells, 7" inner + 10" outer for 6.5" borewells. Rod flushing is charged per running foot on completion. Labor and transport is a lump sum depending on your locality within Greater Hyderabad. All charges are disclosed in a written quotation before drilling begins. Email rajaaborewells@gmail.com or call 9533909091 for the current 2026 rate card.
1. DTH Truck-Mounted Drilling (4.5" or 6.5"): The standard method for all open plots and accessible sites across Greater Hyderabad. A truck-mounted rig with an IR or Atlas Copco compressor drills straight down using a DTH hammer bit. Suitable for residential plots, villa sites, apartment foundations, and commercial construction anywhere in GHMC and outer zones.
2. Robo Borewell Drilling (Under Roof / Confined): Specifically for fully constructed properties in Greater Hyderabad — inside buildings, under low roofs, inside narrow lanes of old Hyderabad localities like Nampally, Koti, Charminar, Abids, and in gated communities where the truck cannot enter. Same DTH quality, compact form factor.
3. Tractor-Mounted Drilling: For agricultural land and open farmhouses on the Greater Hyderabad periphery — Shankarpalli, Chevella, Moinabad, Ibrahimpatnam, Yacharam, and beyond. Faster mobilisation, cost-effective for depths under 600 ft.
4. Borewell Deepening: For existing dry borewells across Greater Hyderabad. Extends the bore 100–400 ft deeper to reach a new fracture zone. More economical than drilling a new bore. Used extensively in areas like Kompally, Medchal, and Dundigal where water tables have dropped.
Rod flushing is done while the drill rods are still inside the freshly drilled borehole. Compressed air blasts down through the hollow drill rods to the bit, forcing all granite cuttings, dust, and rock chips upward and out of the raw open hole — before casing pipe is installed. This is the most critical step in Greater Hyderabad's granite geology because uncleaned cuttings permanently block the water-bearing fractures and reduce yield. Charged per running foot.
Pipe flushing is done after the casing pipe is installed. High-pressure air or water is forced through the installed casing to clear silt and fine material that entered during installation. This is a post-installation step, charged as a lump sum, and is especially critical for 6.5" commercial borewells in Greater Hyderabad's high-demand apartment zones.
Under the Water, Land and Trees Act (WALTA) of Telangana, every new borewell in Greater Hyderabad requires prior written permission from the Mandal Revenue Officer (MRO) of your mandal. The application requires: property ownership documents, site plan showing the proposed drill point and distance from boundaries, and a personal undertaking. Drilling is not permitted beyond 6 PM in residential localities. WALTA permits are mandatory for GHMC, HMDA, and Rangareddy areas. Raja Borewells assists every customer with WALTA application preparation — we do not drill without permission in hand.
Greater Hyderabad's rapid urbanisation — over 1,000 new gated communities, IT parks, and apartment blocks added in the last 10 years — has placed intense pressure on the granite aquifer system. In many areas of Kompally, Medchal, Dundigal, and along the ORR corridors, water tables have measurably dropped since 2018. A borewell recharge pit is the most cost-effective long-term investment for any Greater Hyderabad property. It channels your plot's monsoon runoff directly back into the aquifer your borewell draws from. After 2–3 monsoon cycles, recharge structures measurably improve yield and prevent seasonal drying. Raja Borewells designs and builds recharge structures alongside new bores and retrofits them to existing ones across all of Greater Hyderabad.
For residential plots: drill before construction begins. A pre-construction borewell provides water for the entire build, saving lakhs in tanker costs. Once the building is complete, you can only use a Robo rig — which costs more.
For existing properties: March–May (peak summer) is the best time to drill or deepen in Greater Hyderabad. Water is at its seasonal low — if the bore yields water in May, it will yield year-round.
For agricultural plots on Hyderabad's periphery: November–February after harvest gives the best rig access and avoids crop disturbance.
We mobilise rigs to every locality in GHMC, Rangareddy & Medchal-Malkajgiri districts. Click a zone:
Real reviews from real customers across Hyderabad. Every star rating is submitted by a verified customer.
When you search borewell drilling near me Hyderabad, Google ranks companies with real customer reviews higher. Every review you leave helps Raja Borewells appear in top results for more people searching for trusted borewell contractors in Hyderabad.
You can also leave a review directly on Google by searching "Raja Borewells" on Google Maps — your Google review counts toward our search ranking.
☎ Call 9533909091 to BookWe respond within 30 minutes. Emergency borewell deepening 7 days a week.